Bandwidth（-3dB）DC～10kHz
Max testing current 200Arms 2000Arms
Peak value current 300Apk 3000Apk
1.Summary
CPL2000 is a type of current probe that can test AC and DC simultaneously. The current under test can reach maximum value 2000Arms, peak value 3000Apk, bandwidth 10 kHz (-3dB). With two range selection (200A and 2000A optional), users can choose the proper range according to the current value; with auto zero function, users can make use of CPL2000 easily, and the power and battery low voltage alarm indication light and overload alarm buzzer equipped can notify the users fast. Also, CPL2000 can be powered by battery or external power supply. Its standard BNC output port allows it to connect with oscilloscope and other devices, including multi-meter by BNC to Double Banana plug. CPL2000 is usually used in fields including power frequency measurement, motor drive and power suppy.
1、Electronics Characteristics
Test Condition: 23℃, 60RH， no nearby current, cable under test through the center during testing, load impedance 1MΩ
| Range | 200A | 2000A |
| Max testing current | 200Arms | 2000Arms |
| Peak value current | 300Apk | 3000Apk |
| Range Sensitivity | 10mV/A | 1mV/A |
| Typical Accuracy （DC，45Hz~66Hz） | ±2%rdg.±5mV | ±2%rdg.±1mV |
| Bandwidth（-3dB） | DC～10kHz | |
| Operating voltage | CATII 600V | |
| Typical battery type and service life | 9V alkaline cascade battery/ 15 hour | |
| Low power indication light | Lighted red when battery voltage is lower than 6.5 V | |
| Overload indication | Buzzer will be activated when current under test surpass the range | |
