Model | DP6070A | |||
Bandwidth(-3dB） | 100MHz | |||
Rise time | ≤3.5ns | |||
Accuracy | ±2% | |||
Range selection (Attenuation rate) | 10X/100X | |||
Maximum differential voltage(DC + Peak AC) | 10X | ±70V | ||
100X | ±700V | |||
Common mode voltage(DC + Peak AC) | ±700V | |||
Maximum differential mode VS frequency curve | Reference Figure 1 | |||
Maximum input voltage-to-earth (Vrms) | 450V CATII 600V CATI | |||
Input impedance | Single-ended to ground | 2.5MΩ | ||
Between inputs | 5MΩ | |||
Input capacitance | Single-ended to ground | ＜4pF | ||
Between inputs | ＜2pF | |||
CMRR | DC | ＞80dB | ||
100kHz | ＞60dB | |||
1MHz | ＞50dB | |||
Noise(Vrms) | 10X | ＜23mV | ||
100X | ＜120mV | |||
Differential overvoltage detection level | 10X | ≥70V | ||
100X | ≥700V | |||
Propagation time | Probe | About 9ns | ||
BNC Line(1m) | About 5ns | |||
Bandwidth limit filters (5MHz) | ≥-3dB@5MHz | |||
Overload indicator (red light） | Yes | |||
Overload alarm | Yes(Can shut up manually) | |||
Automatic save | Yes | |||
Offset setting function | Yes（ Set in test mode） | |||
Terminate load | ≥100kΩ | |||
Power supply | USB 5V/1A adapter | |||
Safety standard | EN61010-1: 2010 | |||
EMC standard | EN61326-1:2013 EN61000-3-2:2006+A1:2009+A2:2009 EN61000-3-3:2013 | |||
